SERVICES

THE SYSTEMS THAT
REPLACE TEAR-OFFS.

THE BASICS

WHAT IS SPF
ROOFING?

R-6.5 / INCHSEAMLESSMONOLITHICSELF-FLASHINGPONDING WATER ENGINEERED

SPF (Spray Polyurethane Foam) is a monolithic, seamless roofing system sprayed directly onto your existing roof at R-6.5 per inch. The foam expands on contact, filling every crack, seam, and joint to create a single self-flashing waterproof membrane with no weak points, engineered to handle ponding water.

A protective silicone topcoat is then applied over the foam, giving you a UV-resistant, energy-efficient surface that reflects heat and can be recoated every 15-20 years indefinitely, without ever tearing off the original roof.

Because there’s no demolition involved, most SPF projects are completed in 3-4 days with zero disruption to your tenants or daily operations.

At R-6.5 per inch, SPF delivers the highest R-value of any commercial roofing insulation. A minimum 1.5″–2.00″ application yields R-9.75 and greater, outperforming single-ply, BUR, and metal roof systems at equivalent or greater thickness. The result is measurably lower heating and cooling costs from day one.

8/10
ROOFS QUALIFY
20-30%
ENERGY SAVINGS
$0
TEAR-OFF WASTE
15-20yr
WARRANTY OPTIONS
THE ALTERNATIVE

WHAT IS SILICONE ROOF
RESTORATION?

PONDING WATER RATEDUV REFLECTIVESEAMLESS APPLICATIONRECOATABLE INDEFINITELYVOC UNDER 10 g/LCOOL ROOF RATED

Silicone roof restoration is a direct-applied coating system that waterproofs and UV-protects your existing roof membrane without foam insulation. It’s the right choice when your roof structure and insulation are sound but the surface membrane has degraded: cracking, ponding, or losing reflectivity.

Sherwin-Williams silicone coatings are rated for ponding water exposure, reflect solar radiation to reduce cooling loads, and maintain flexibility through extreme temperature cycling. Unlike acrylics, silicone won’t re-emulsify in standing water.

Application typically takes 2-5 days depending on roof size, with zero tear-off, no disruption to building operations, and no landfill waste. The coating can be recoated indefinitely, making it a permanent waterproofing solution.

Silicone restoration is often the most cost-effective path for roofs that don’t need additional insulation. When paired with a Sherwin-Williams warranty, it delivers long-term protection at a fraction of replacement cost.

7-15%
COOLING COST REDUCTION (CRRC)
2-5
DAYS TYPICAL APPLICATION
$0
TEAR-OFF REQUIRED
TWO SYSTEMS, ONE GOAL

CHOOSE YOUR ROOFING SYSTEM.

TIER 1

SILICONE
RESTORATION

Surface protection when your roof structure is sound but the membrane is degraded.

$3.75- $5.75
PER SQUARE FOOT
UV-resistant silicone topcoat
Waterproofing restored
No tear-off required
Extends roof life 10-15 years
Recoatable indefinitely
Minimal disruption (1-2 days)
RECOMMENDED
TIER 2

SPF + SILICONE
SYSTEM

Full spray foam insulation with silicone topcoat. The complete engineered roofing system.

$8- $15
PER SQUARE FOOT
Everything in Silicone, plus:
R-6.5 insulation per inch
Seamless monolithic membrane
Self-flashing at all penetrations
Ponding water engineered
20-30% energy cost reduction
Insurance reclassified as new roof
Sherwin-Williams warranty (15-20 yr)

Base pricing does not include costs associated with wet insulation remediation or roof decking replacement. If a thermal drone inspection identifies saturated insulation or compromised decking, those areas will require remediation prior to SPF application. Scope and cost will be outlined in your proposal following inspection.

THE NUMBERS DON’T LIE

SPF RESTORATION VS.
FULL TEAR-OFF

COST PER SQ FT
$8 – $15
Spray-applied over existing roof
SPF
$18 – $25
Demo + disposal + new materials
TEAR-OFF
PROJECT TIMELINE
3 – 4 days
Building stays fully operational
SPF
4 – 6 weeks
Extended noise, dust, access issues
TEAR-OFF
LANDFILL WASTE
Zero
No tear-off. No debris. No dumpsters.
SPF
Full demolition
Thousands of pounds hauled to landfill
TEAR-OFF
INSURANCE CLASSIFICATION
New roof
Resets to full replacement cost value
SPF
Depreciating
Depreciating asset from day one
TEAR-OFF
WARRANTY
15 – 20 yr
Sherwin-Williams backed, renewable
SPF
Varies
Contractor-dependent, non-transferable
TEAR-OFF
APPLICATION PROCESS

FROM INSPECTION TO WARRANTY.

01
INSPECTION & PREP

Thermal drone survey identifies moisture and damage. Existing membrane is cleaned, repaired, and prepped. No demolition needed.

02
SPF APPLICATION

Closed-cell spray polyurethane foam is applied at R-6.5 per inch. The foam expands on contact, filling every crack, seam, and penetration into a seamless monolithic membrane.

03
SILICONE COATING

UV-resistant silicone elastomeric coating applied over foam. Provides weather protection, solar reflectance, and the surface that can be recoated every 15-20 years.

04
SW INSPECTION & WARRANTY

Sherwin-Williams sends an independent inspector to verify application quality before issuing the 15 or 20-year product warranty. Real third-party accountability.

SHERWIN-WILLIAMS WARRANTY

BACKED BY A NAME YOU KNOW.

Every Pinnacle SPF installation is independently inspected by Sherwin-Williams before the warranty is issued. This isn’t a contractor warranty. It’s a manufacturer-backed product warranty with third-party verification built in.

15
YEAR WARRANTY

Standard coverage for qualifying SPF installations. Renewable with recoat.

20
YEAR WARRANTY

Premium coverage tier. Maximum protection with Sherwin-Williams’ full product backing.

Smooth BUR substrates qualify for a maximum 10-year warranty. Gravel BUR substrates may qualify for up to a 15-year warranty. Warranty eligibility is determined following thermal drone inspection and Sherwin-Williams substrate assessment.

GET STARTED

LET’S LOOK AT
YOUR ROOF.

Every project starts with a thermal drone inspection. No ladders, no disruption. Just data.

Free thermal inspection - no strings attached
Full digital report within 48 hours
Sherwin-Williams certified applicator
OR CALL DIRECTLY
(440) 804-4630

SCHEDULE FREE INSPECTION

Takes 2 minutes. We’ll handle the rest.

Free inspection · No obligation · Report within 48 hours